uropean Part-No.Description, Conductor Color & Cross-sec. mm2Cond. make-up
n x wire ØOuter
Diameter
mmCopper Weight
kg/kmWeight
ca. kg/kmAWG23110FZ-LSi Ignition Cable 16 kV, blue, 0.57 x 0.35.04.836.02023106FZ-LSi Ignition Cable 16 kV, blue, 1.019 x 0.257.59.565.01723107FZ-LSi Ignition Cable 16 kV, blue, 1.528 x 0.268.514.488.016 European Part-No.Description, Conductor Color & Cross-sec. mm2Cond. make-up
n x wire ØOuter
Diameter
mmCopper Weight
kg/kmWeight
ca. kg/kmAWG23109FZ-LS High Voltage Ignition Cable 15/20 kV, red-brown, 1.019 x 0.255.09.634.01723108FZ-LS High Voltage Ignition Cable 15/20 kV, red-brown, 1.019 x 0.257.09.660.017 European Part-No.Description, Conductor Color & Cross-sec. mm2Cond. make-up
n x wire ØOuter
Diameter
mmCopper Weight
kg/kmWeight
ca. kg/kmAWG23147Neon Light Cable 3.5kV, 4.5kV & 7.5kV, yellow, 1.530 x 0.254.414.432.01623148Neon Light Cable 3.5kV, 4.5kV & 7.5kV, yellow, 1.530 x 0.256.614.459.01623149Neon Light Cable 3.5kV, 4.5kV & 7.5kV, yellow, 1.530 x 0.257.614.475.016

Technical DataEuropeanFZ-LSi, blue

• Test Voltage 20 kV
• Breakdown Voltage min. 30 kV
• Ignition Voltage (kV eff.)
  0.5 mm² = 6 kV
  1.0 mm² = 8 kV
  1.5 mm² = 10 kV

FZ-LS, red

• Test voltage
  for 5 mm Ø = 15 kV
  for 7 mm Ø = 20 kV
• Breakdown voltage
  for 5 mm Ø: min. 25 kV
  for 7 mm Ø: min. 35 kV

Neon-light-Cable, yellow

• Nominal voltage
  3.5 kV, 4.0 kV / 7.5 kV
• Test voltage 10 kV
• Specific volume resistive
  min. 1012 Ohm x cm
• Minimum bending radius
  approx. 7.5x cable Ø
• Radiation resistance
  up to 20x106 cJ/kg (up to 20 Mrad)
• Tinned copper stranded conductor, strand make-up see table below
• Silicone conductor insulation 2GI1 to DIN VDE 0207 part 20
• Glass-fiber braiding
• Outer-jacket silicone 2GM1 to DIN VDE 0207 part 21
• Jacket color: Blue

FZ-LS, red

• Adapted to ISO 3808 part 1
• Tinned copper conductor, 19x0.25 mm Ø
• Silicone conductor insulation 2GI1 to DIN VDE 0207 part 20
• Jacket color: Red Brown

Neon-light-cable, yellow

• in adapted to DIN VDE 0250 part 1 and part 5
• Tinned copper stranded conductor 30x0.25 mm Ø
• Silicon conductor insulation 2GI1 to DIN VDE 0207 part 20
• Jacket color: Yellow

Application FZ-LSi, blue
This ignition cable is suitable for use at high and extremely alternating temperatures up to +180°C/+356°F and also for motor vehicle sector. As protection against mechanical damages a glass fiber braiding and a silicone jacket covers the conductor insulation.
FZ-LS, red
This ignition cable is suitable for use at high and extremely alternating temperatures up to +180°C/+356°F. Applications include the lamp and lighting industry and cooling and air conditioning technology.
Neon-light-cable, yellow
This cable is primarily suitable for use at high and extremely alternating ambient temperatures such as in the lamp and lighting industry. Protected installation is required.

• Halogen-free according to VDE 0482 part 267 / DIN EN 50267-2-2/ IEC 60754-2 (equivalent DIN VDE 0472 part 813)
• No flame propagation according to DIN VDE 0482 part 265-2-1 / EN 50265-2-1 / IEC 60332-1 (equivalent DIN VDE 0472 part 804 test method B)
• No formation of corrosive gases
• Low smoke density
• Very good weather resistance